Voltage Output Curve Vs. RPM Pulley Generator

Voltage output vs RPM curve for PPG-B300 DC Generator sold by Pedal Power Generator LLC

Generator Voltage Output Vs. RPMs
The white line shows how many Volts the generator will put out with no load attached to the generator. That is why it is labeled “0 Amps” .

This graph shows actual data from this generator  installed on a pedal power generator bike generator  stand.  It was measured using a LabVIEW program called  “WattsVIEW”  The red line on the chart shows the Amps measured while charging a lead acid 12V battery.  The white line shows the Voltage of the battery.  One can see that at one point the white line reached to approximately 14 Volts.   

Test / Benchmark Results

You may already know  this but we will mention it here anyway.   Watts is  equal to Volts x Amps.  So the graph below is the product of taking the data points from the red line above and multiplying each point with the from the white line.   Below the green line is in Watts.

Test / Benchmark Results
Model PPG-R300 Generator
0-12V
0-12V
0-24V DC Leeson
0-24V DC Leeson
0-24V DC MNS-Power
PPG-B300
0-90V DC
0-90V DC
0-180V DC
0-180V DC
0-110V DC
0-110V DC
0-120V DC
0-120V DC
Dynamo
Dynamo
Alternator
Alternator